Escape Club Vault Zero Walkthrough Guide – Train Puzzle

Vault Zero is one of the more challenging escape rooms in Escape Club on Roblox. Unlike some of the other maps, this one requires you to solve several tricky puzzles involving train tracks, hidden rooms, security cameras, fake gold bars, secret vaults, and confidential documents.

In this guide, I will walk you through the complete Vault Zero walkthrough and explain how to solve every puzzle step by step. We will start by escaping the Intake Room and eventually make our way through Vault Zero to complete the final escape sequence.

Escape Club Vault Zero Walkthrough Guide – Train Puzzle, Codes

Some puzzles, especially the security camera puzzle and the fake gold bar challenge, can have different answers depending on your game. I will explain the logic behind them so you can find the correct answers in your own session instead of relying on fixed combinations.

1. Escape the Intake Room (Train Puzzle)

When you enter Vault Zero, your first objective is to escape the Intake Room.

This is one of the easiest puzzles in the map. You will find a train track mechanism that you need to arrange correctly to allow the cart to reach the other end.

Rotate the track pieces until they form the correct path.

Once the tracks are connected properly, press the red button to activate the cart.

The cart will travel to the end of the track and deliver a handle.

Collect the handle and place it in the designated slot near the door.

This will unlock the door, allowing you to leave the Intake Room.

2. Find the Secret Room (Blueprint Puzzle)

After leaving the Intake Room, your next objective is to discover a secret room.

First, open the nearby compartment to collect a blueprint. Take this blueprint and place it on the table to reveal the layout puzzle.

You will notice three different coloured layouts:

  • White
  • Blue
  • Yellow

The white layout is already in the correct position, so you should leave it as it is.

Your task is to rotate the blue and yellow layouts until they perfectly overlap the white layout.

How to Solve the Blueprint Puzzle

Follow these steps:

  1. Place the blueprint on the table.
  2. Keep the white layout in its original position.
  3. Rotate the blue layout until it matches the white layout.
  4. Now rotate the yellow layout until it also matches the white layout.
  5. Check that all three layouts are correctly aligned.

Once you arrange everything correctly, the blueprint will reveal the location of a secret room.

Look for the vent in the revealed area. Open it and collect the key card hidden inside.

You will need this key card to access the next section.

3. Rebuild the Rook’s Route (Security Camera Puzzle)

This is probably the hardest puzzle in Vault Zero. You need to examine four security cameras and figure out the correct order of movement detected by each camera.

The tricky part is that the cameras have different time errors. Some are ahead of the actual time, while others are behind.

You cannot simply compare the displayed timestamps. First, you need to correct each camera’s clock.

Step 1: Understand the Time Reference

Use your key card to access the next area and examine the instructions.

The information tells you that the service light was activated at exactly 23:00 (11 PM).

This is your reference time.

You will find four security cameras:

  • Camera A
  • Camera B
  • Camera C
  • Camera D

Each camera has recorded the movement at a different time, but their clocks are not synchronized.

Your job is to calculate the actual time for each motion detection.

Step 2: Correct Camera A

In my game, Camera A showed the service light activating at 23:02.

We already know that the actual service light time was 23:00.

This means Camera A is running two minutes ahead.

Therefore, you need to subtract two minutes from its recorded motion detection time.

For example, Camera A recorded motion at 23:07.

Subtract two minutes:

23:07 – 00:02 = 23:05

So, the actual motion detection time for Camera A is 23:05.

Step 3: Correct Camera B

Now check Camera B.

In my game, the service light appeared at 22:58 instead of 23:00.

This means Camera B is two minutes behind.

Therefore, you need to add two minutes to its recorded motion detection time.

After correcting the time, the actual motion detection time was:

23:01

Step 4: Correct Camera C

Now move to Camera C.

In my game, this camera was four minutes ahead of the actual time.

So, subtract four minutes from its recorded motion detection time.

After correcting it, the actual motion detection time was:

23:03

Step 5: Correct Camera D

Finally, check Camera D.

This camera was three minutes ahead.

Therefore, subtract three minutes from its recorded motion detection time.

The corrected motion detection time was:

23:07

Step 6: Enter the Correct Camera Order

Now that we have corrected all four camera times, arrange them from earliest to latest.

Here are the results from my game:

Camera Corrected Motion Time
Camera B 23:01
Camera C 23:03
Camera A 23:05
Camera D 23:07

Therefore, the correct sequence in my game is:

<escape>B → C → A → D</escape>

Enter the camera sequence into the mechanism and press the green button.

Important: Your camera timings and final sequence may be different. Always use 23:00 as your reference time, calculate the difference for each camera, and arrange the corrected motion times from earliest to latest.

Step 7: Open Locker B15

Once you successfully solve the camera puzzle, check the information displayed on the security camera.

In my game, it showed:

B15

This means you need to find and open Locker B15.

Inside the locker, you will find several items, including a video tape.

Collect the tape and place it inside the video tape player.

The player will reveal important information on your documents, including the actual video timings and authorized release timings.

Collect these documents because you will need them for the next challenges.

With that, the Rook’s Route puzzle is completed.

4. Find the Fake Gold Bar

Your next objective is to find one fake gold bar in the Inspection Row.

Use your key card to enter the inspection area.

Once inside, read the instructions carefully. They explain that there is only one fake gold bar among the collection.

Here is the important information:

  • Real gold bars weigh 1 kg each.
  • The fake gold bar weighs 900 grams.
  • You need to identify the lighter gold bar using the weighing machine.

The difference is only 100 grams, so you need to be careful when comparing the bars.

How to Identify the Fake Gold Bar

The easiest way to solve this puzzle is by using the weighing balance.

There are multiple gold bars in the room, and you need to narrow down which one is fake.

I recommend testing them in smaller groups.

For example:

  1. Place three gold bars on one side of the weighing machine.
  2. Place another three gold bars on the opposite side.
  3. Check whether the balance is equal or one side is heavier.
  4. If both sides are balanced, the fake bar is not in either group.
  5. If one side is lighter, the fake bar is among the gold bars on that side.

Continue testing the possible candidates until you identify the gold bar that weighs 900 grams.

In my game, the third gold bar was the fake one.

Collect the Fake Gold Bar Plate

Once you identify the fake gold bar, place it on the designated inspection machine and pull the lever.

The machine will verify your selection and give you a plate.

Collect this plate because it is required to open Vault Zero.

5. Open Vault Zero (Shape Alignment Puzzle)

Now that you have found the fake gold bar, head towards the secret Vault Zero entrance.

Place the gold bar in the designated slot. Once you position it correctly, you will reveal a set of shapes on the plate.

In my game, the required combination was:

Circle → Star → Star

Your objective is to arrange the three tiles so that they display the same shapes as the plate.

How the Tile Mechanism Works

This puzzle can be a little confusing because moving one tile can also affect another tile.

Here is how the mechanism works:

  • Moving the left disk changes the left position.
  • Moving the middle disk affects the middle and right positions.
  • Moving the right disk changes the right position.

You need to understand how these movements interact before attempting to match the final combination.

Enter the Correct Shape Combination

First, examine the plate to identify your required shapes.

In my game, the target was:

Position Required Shape
Left Circle
Middle Star
Right Star

Now experiment with the disks until all three positions match the required arrangement.

I found this puzzle a little tricky because the disks affect multiple positions, so you may need several attempts to get everything aligned correctly.

Once the three shapes match the plate, pull the lever.

The mechanism will activate, and the Vault Zero door will open.

6. Find the Fake Document

After entering Vault Zero, your next task is to identify the fake document.

This puzzle is relatively straightforward compared to the previous challenges.

You will find several documents that need to be placed into their corresponding slots.

Simply examine each document and place it in the slot where it belongs.

Once you have correctly sorted the documents, you should be left with just one document that does not fit the correct arrangement.

This is the fake document.

Verify the Fake Document

Take the remaining document and place it inside the verifier machine.

The machine will check your selection.

If you have identified the correct fake document, it will unlock the case.

Collect the case because it is required for the final puzzle.

7. Solve the Final Layout Puzzle and Escape

You are almost finished!

After collecting the case, you need to solve one final layout puzzle to complete Vault Zero.

Take the case and place it in the designated location.

You will now see another layout mechanism that needs to be corrected.

This puzzle is similar to the blueprint puzzle we solved earlier, where you had to rotate different layouts until they matched the correct arrangement.

Correct the Final Layout

Your task is to rotate the layout pieces until the entire arrangement is correct.

Pay attention to the different sections and make sure each piece is positioned in the correct direction.

In my game, I had to rotate the pieces to match the layout near the Surface Dock.

Once all the pieces are aligned correctly, the indicator will turn green.

Now place the lever in the mechanism and activate it.

The final release mechanism will open, completing the escape room.

Congratulations! You have successfully completed Vault Zero in Escape Club.

That is the complete walkthrough for Vault Zero in Escape Club on Roblox.

This is definitely one of the more challenging maps because it requires you to solve several different types of puzzles. The security camera puzzle is probably the trickiest part, especially when you need to calculate the clock differences and rebuild the Rook’s Route.

My biggest recommendation is to take your time with the camera timings and the weighing balance. Once you understand how these puzzles work, the rest of the escape room becomes much easier.

Hopefully, this guide helped you complete Vault Zero. If you are still stuck on any particular puzzle, let me know in the comments, and I will help explain how to solve it!

Eric Langell
Eric Langell

Eric is a Senior Writer for Treyexgaming, primarily covering guides and codes, as well as general gaming news and guides. After leaving university with a degree in Bachelor in Physical Education.

Articles: 2453