The Dino Lab has several different challenges, including finding door codes, identifying geological layers, assembling a dinosaur skeleton, and digging for hidden fossils. Some puzzles can be a little confusing, especially the Code Lab and dinosaur pose challenges.
Escape Club The Dino Lab Walkthrough Guide – Puzzles
I’ll explain each step in order so you can follow along without missing anything. Keep in mind that some puzzle answers are different for each player, so I’ll also explain how to find the correct answers in your own game.
1. Escape the First Room
The first objective is to escape the starting room, but the door is locked and you’ll need a key to get out. You can find the key inside the drawer, but first, you need to figure out its four-digit code.
Look at the newspaper lying in the room. It contains a clue about the day a boy discovered a shiny stone.
For example, if the newspaper was published on April 20 (4/20), and the text says the boy found the stone yesterday, you need to subtract one day from the published date.
-
Newspaper date: 4/20
-
Discovery date: 4/19
-
Drawer code: 419
Enter the correct date in the drawer to collect the key. Remember that the number of days you need to subtract can change. Sometimes the newspaper might mention two, three, or four days earlier, so read the clue carefully instead of using the same code every time.
Once you have the key, use it on the locked door to complete the first objective.
2. Unlock the Preparation Lab
After entering the next room, your objective is to unlock the Preparation Lab. You’ll find a notebook containing a clue about the date of the first dig.
The notebook tells you that the required code is the date of the first excavation. Look at the picture nearby, which shows a digging scene. You should notice a date printed on the photograph.
In this case, the date is 09/22, so the code is:
0922
Enter 0922 into the keypad to receive the access pass. Take the pass and use it on the locked door to enter the next area.
3. Solve the Code Lab Puzzle
Now it’s time to enter the Code Lab. This is probably the trickiest puzzle in the entire room, so take your time here.
Your objective is to identify five geological symbols by comparing the diagrams with the descriptions provided in the laboratory.
You need to identify the five shapes in the correct order and enter their corresponding answers. The puzzle can be different for everyone, so don’t blindly copy the answers below. Instead, compare each diagram with its description.
Here is how I solved mine:
First Symbol: Fault
The first diagram shows a fault, which you can identify by looking at the way the geological layers are displaced.
Check the descriptions available in the laboratory to confirm that the diagram matches the fault formation.
Second Symbol: Sill
The second diagram shows a black layer positioned between two red layers.
Look for the description of a sill. It explains that a sheet of rock cuts sideways between existing layers, matching the diagram.
Third Symbol: Impact
For the third symbol, look at the very top geological layer.
The description of Impact mentions a thin black ash layer near the top. This matches the third diagram, so the answer is Impact.
Fourth Symbol: Dike
The fourth diagram is easier to identify because its shape is clearly shown.
It represents a Dike, so select that as your fourth answer.
Fifth Symbol: Erosion
Finally, look at the fifth diagram. It shows a brown layer with rocks and an uneven boundary.
Check the description of Erosion. It refers to a bumpy boundary where rocks have been worn away, which matches the diagram.
For my game, the five answers were:
| Position | Answer |
|---|---|
| 1 | Fault |
| 2 | Sill |
| 3 | Impact |
| 4 | Dike |
| 5 | Erosion |
Important: These answers and their positions may change between players. Use the diagrams and descriptions in your own game to identify the correct sequence.
Once you’ve entered all five symbols correctly, you’ll receive a tube. Collect it because you’ll need it for the next puzzle.
4. Complete the Tube Alignment Puzzle
After solving the symbol puzzle, take the tube and place it in the machine nearby.
This puzzle is fairly simple once you understand what you’re supposed to do. Your objective is to align the black boundary layer of each tube with the red guideline.
You need to adjust each tube until its black layer matches the red line.
Follow these steps:
-
Place the first tube and adjust it until the black layer lines up with the red guide.
-
Repeat the same process for the second tube.
-
For the third tube, flip it before adjusting its position.
-
Align the fourth tube with the red guideline.
Once all four tubes are correctly aligned, the Code Lab objectives will be completed, and the next door will open.
5. Mount the Dinosaur Skeleton
Next, we need to mount the dinosaur skeleton. There are three things you need to complete in this area.
The first task is to replace the missing lower jaw. The second is to solve the dinosaur pose puzzle, and the final task involves finding the missing skeleton pieces.
Print the Missing Dentary Jaw
Start by checking the information beside the dinosaur skeleton. It tells you that the left lower jaw is missing.
The scientific name for this bone is Dentary, so you’ll need to print it using the 3D printer.
Here’s what you need to do:
-
Find the battery and place it in the 3D printer.
-
Open the available bone models.
-
Select the Dentary model.
-
Make sure you mirror the model before printing.
-
Start the printing process and wait for it to finish.
-
Collect the printed lower jaw and attach it to the dinosaur skeleton.
Important: Don’t forget to mirror the Dentary model. If you print it without mirroring, it won’t fit correctly, and you’ll have to print it again.
Solve the Dinosaur Pose Puzzle
After attaching the lower jaw, you’ll need to reconstruct the dinosaur’s original pose using the clues provided in the laboratory.
Read the excavation log and examine the footprints carefully. The clues will tell you how the dinosaur was standing when the tracks were created.
Here is how to understand each part:
1. Body Position
The log mentions that the dinosaur crouched down. This means you need to select the crouching position.
2. Weight Distribution
Look at the footprints on the ground. One footprint will be deeper than the other, which indicates where the dinosaur placed most of its weight.
In my puzzle, the right footprint was deeper, so I selected the right foot for the weight distribution.
3. Arm Position
Check the text describing the hand marks.
If the clue mentions hand-edge marks, select palms facing in. If the clue describes a different type of hand mark, use the palms-down position instead.
For my puzzle, the clue mentioned hand-edge marks, so I selected palms facing in.
4. Tail and Neck Direction
This part is easier because you can directly examine the marks on the ground.
-
Tail direction: Left
-
Snout direction: Center
-
Neck direction: Forward
After setting all the positions, check your selections. If everything matches the clues, the dinosaur pose puzzle will be completed, and the door will open.
6. Dig the Fossil Pit
Now we need to find the missing dinosaur skeleton pieces by digging in the excavation area.
Before you start digging, you need to use the three radar readings to identify the correct location on the map.
In my game, the readings were:
| Radar | Reading |
|---|---|
| Radar 1 | 5.7 |
| Radar 3 | 3.5 |
| Radar 2 | 5.0 |
Enter each reading into its corresponding position on the map.
Once you’ve entered all three measurements, look for the point where the geological layers intersect. This is the location where you need to dig.
For my puzzle, the correct digging position was:
-
Row: 4
-
Column: 3
Dig at the intersection to discover the dinosaur’s skull.
Find the Dinosaur’s Tail
Finding the skull isn’t the end of the excavation. You also need to locate the dinosaur’s tail.
Continue digging through the excavation area and follow the skeleton’s tail until you reach its very end.
Once you find the correct spot, collect the item. You’ll receive the Director’s Key.
Take this key to the director’s locked door and use it to unlock the next area.
This completes the Dig Pit objective.
7. Lift the Laboratory Lockdown
We’re almost at the end! The next objective is to lift the laboratory lockdown so you can reach the elevator and escape.
For this puzzle, you need to collect three different pieces of information:
-
Specimen Number
-
Boundary Depth
-
Sprint Speed
Let’s find each answer.
Find the Specimen Number
The specimen number is the easiest one to find.
Look around the laboratory for the specimen information. You’ll find the number displayed nearby.
In my game, the specimen number was:
9093
Write it down because you’ll need to enter it into the lockdown control panel.
Find the Boundary Depth
Next, head to the Cold Lab.
Inside, look for the highlighted red information showing the boundary depth.
In my game, the displayed measurement was:
1167 cm
Make sure you write down the complete number.
Find the Dinosaur’s Sprint Speed
This is slightly more complicated because you need to use the measuring tape to calculate the correct speed.
First, use the tape measurement to measure the length shown in the laboratory. The first measurement in my game was 360.
Next, measure the feet, which gives you 48.
Now, use both measurements to identify the correct position on the nearby chart.
When you enter 360 and 48, you’ll see a red line crossing the 11th number.
This means the dinosaur’s sprint speed is:
11 km
8. Enter the Final Codes and Escape
Now that we’ve collected all three answers, return to the lockdown control panel and enter the information.
For my game, the final answers were:
| Required Information | Answer |
|---|---|
| Specimen Number | 9093 |
| Boundary Depth | 1167 cm |
| Sprint Speed | 11 km |
Enter all three answers correctly to lift the lockdown.
Once the system accepts your answers, the elevator will become available. Head inside the elevator to complete the final objective and escape the Dino Lab!
Escape Club: The Dino Lab Walkthrough – All Answers
If you want to quickly check the important answers while playing, here’s a summary of the solutions from my run.
| Puzzle | Answer |
|---|---|
| First Room Drawer | 419 |
| Preparation Lab | 0922 |
| Code Lab | Fault, Sill, Impact, Dike, Erosion |
| Missing Dinosaur Jaw | Dentary (Mirrored) |
| Dinosaur Pose | Crouched, Right Foot, Palms In |
| Tail Direction | Left |
| Neck Direction | Forward |
| Radar 1 | 5.7 |
| Radar 3 | 3.5 |
| Radar 2 | 5.0 |
| Digging Location | Row 4, Column 3 |
| Specimen Number | 9093 |
| Boundary Depth | 1167 cm |
| Sprint Speed | 11 km |
Remember that some answers, especially the first room code, geological symbols, radar readings, and excavation coordinates, can vary between players.
That’s everything you need to complete Escape Club: The Dino Lab in Roblox. If you follow each step carefully, you should be able to solve all the puzzles, recover the dinosaur skeleton, lift the lockdown, and escape without getting stuck.
